ARDEX B160 FLOW - Fluid mortar for repair and anchoring

Repair of concrete and mortar surfaces by pouring, especially in aggressive environments. Resistant to sulphate attack, it protects the reinforcements of the reconstructed elements.

Filling of joints between concrete sections, prefabricated elements, etc. Repair of concrete construction parts. Spalling of pillars. Repair of structural elements: reinforced or prestressed concrete beams under static or dynamic loads, marine structures, slab edges, etc. by pouring and formwork.

• For indoor and outdoor use.
• Repair of concrete surfaces by pouring
• Especially indicated in aggressive environments
• Resistant to sulphate attack
• Additivated with corrosion inhibitors. Suitable for the
• preservation or restoration of passivation (Principle 7, method
• 7.1 and 7.2 of UNE-EN 1504-9). “Increasing the coverage
• with additional mortar and replacing contaminated or
• carbonated concrete”
• High mechanical resistance
• Compensated shrinkage to prevent the appearance of cracks
• High fluidity, perfectly fills gaps and cavities
• Reinforced with fibres
• Free of chlorides
• Classified R4 according to UNE EN 1504-3
• Certified according to UNE EN 1504-6

Field of application:

Repair by pouring of concrete and mortar surfaces, especially in aggressive environments. Resistant to attack by sulphates, protects the reinforcements of the reconstructed elements.

Filling of joints between concrete sections, prefabricated elements, etc. Repair of concrete construction parts. Spalling of pillars. Repair of structural elements: reinforced or prestressed concrete beams under static or dynamic loads, marine structures, edges of slabs, etc. by pouring and formwork.

For indoor and outdoor use.

Properties:

Great adhesion to the support.

Sets by compensating for shrinkage, preventing the appearance of cracks.

High mechanical resistance, both short and long term.

Good chemical resistance, resistant to aggressive environments with the presence of sulphates.

Additives with corrosion inhibitors, protects the repairs carried out against corrosion.

Good resistance to abrasion.

Supports thicknesses from 6 to 60 mm.