Your cart
There are no more items in your cart
Fluid mortar for repairing concrete, fillings and anchors, spalling of pillars, filling of joints between concrete sections, prefabricated elements, etc.
- Reinforced with fibres
- Free of chlorides
- High initial and final mechanical strengths
- Resistant to sulphates
- Repair of concrete and reinforced concrete structures
- Restrain-compensated, prevents the appearance of cracks
- High thixotropy
- Excellent workability
- Additivated with corrosion inhibitors
- Application in thin and thick layers
- Its high fineness and light colour allow its use without the application of
- cosmetic finishing mortars
- Classified R4 according to UNE EN 1504-3
- Certified according to UNE EN 1504-7
Field of application:
Repair of concrete and reinforced concrete structures, filling of holes and fissures, repair of spalling in pillars, edges of slabs, etc. where high mechanical strength is required in a short space of time.
Repair of structural elements in aggressive environments.
Repairs where it is necessary to remove props in a short time.
Vertical work.
Structures subject to vibrations and impacts in a few hours.
For use indoors and outdoors.
Product description:
Grey cement powder, carefully selected aggregates, fibres, synthetic resins and selected additives for rapid hardening and commissioning.
It sets by compensating for shrinkage, minimising the appearance of cracks.
It has high mechanical strength, both short and long term.
It contains corrosion inhibitors that protect the reinforcement even at low application thicknesses.
Resistant to sulphates, suitable for aggressive environments such as industrial areas, coastal areas, etc.
Excellent workability, does not sag, easy application and fine finish.
It supports thicknesses from 5 to 50 mm.
Its high fineness and light colour allow its use without applying cosmetic finishing mortars.
Technical data
- Mixing ratio: Approx. 3.75 – 4 l. of water: 25 kg. of powder, equivalent to approx. 1 vol. of water: 4.5 vol. of powder.
- Density of fresh mortar: Approx. 2.1 kg/litre.
- Yield: Approx. 1.8 kg. of powder per m2 and mm.
- Workability time (+20°C): Approx. 10-15 min.
- Start of setting (+20°C): Approx. 20-25 min.
- Final setting (+20°C): Approx. 25-30 min.
- Compressive strength: After 28 days ≥ 45 N/mm2.
- Packaging: 25 kg bags.
- Storage: Approx. 12 months in dry places and in its original closed packaging.
