ARDEX BS - Colores estándar - 5 kg

ARDEX BS - Flexible tile grout for wide joints

Flexible tile grout for wide joints. Universal mortar for sealing, grouting, tiles joints from 2 to 20mm. Tiles can be trafficked after 4 hours. Exterior and interior. Complies with EN 13888 CG1.

Color ES
  • Antracita
  • Gris Cemento
  • White
  • Jazmín
  • Beige
  • Marrón Claro
Packaging format
Pack format
142189
€33.60
Tax excluded

Description

CG2_100x100.png    Marcado CE

For grouting or grouting tiling and flooring. Borada or universal mortar for sealing joints from 2 to 20mm. Passable after 4 hours. Exterior and interior. Colours: Light Brown, Anthracite Grey, Beige, Cement Grey, Light Grey. Complies with EN 13888 CG1.

Field of application:

  • For grouting racholas, tiles and all types of ceramic, vitreous and natural stone pieces, bricks, slabs and facade joints.
  • For floors and walls. Also used in masonry work.
  • For joints from 2 to 20 mm. For exteriors and interiors.

Product description:

Powdered grout based on cement and special fillers.

When mixed with water, a soft, doughy and productive mortar is obtained. It is easy to work with, non-flammable and has a high filling capacity. It sticks strongly without cracking. The joints after hardening are dirt-repellent.

Instructions for use:

Pour clear water into a mixing container and mix ARDEX BS until a lump-free, homogeneous, pasty mortar is obtained.

Mixing ratio:

25 kg ARDEX BS : approx. 5 litres of water.

5 kg ARDEX BS : approx. 1 litre of water.

The mortar can be worked at a temperature of 18 to 20°C for 2-3 hours and is applied with a rubber spatula pressing hard against the joints. Even deep joints can be made in a single pass. For dusting, use ARDEX BS by applying liberally.

A unique shade of colour can be achieved if the tiles are laid in a thin coat.

In a thick layer, the mortar must be very dry to avoid variations in the colour shade due to water evaporation. Grouted surfaces can be washed with a wet sponge; even after a long time the material can be washed. After drying, the mortar film can be removed with a damp sponge.

If in doubt, carry out a preliminary test.

Work ARDEX BS joint paste at temperatures above 5°C and below +30°C.

Recommendations:

When grouting porous or vitreous tiles and pieces, it is possible that mortar residues may stick to the grout. It is essential to test these tiles.

In case of treatment with acids, wash the joints beforehand.

The humidity of the substrate and the different absorption capacity of the edges of the tiles can lead to a variation in the colour of the joints.

For joints that have to be subjected to rapid loading, we recommend using ARDEX JK because of its rapid start-up time.

In spas and swimming pools, we recommend using ARDEX WA or ARDEX EG8, joint mortars with epoxy resin, resistant to chemical attack and aggressive cleaning.

For marble joints in interiors, it is recommended to use ARDEX MG, which prevents discolouration.

Precautions:

Contains cement, irritating to eyes and skin. Keep out of the reach of children. Avoid contact with eyes and skin. In case of contact with eyes, rinse immediately with clean water and seek medical advice.

Wear suitable gloves.

After drying has no physiological or ecological effects.

GISCODE ZP 1 = Product containing chromate poor cement.

Technical data:

Mixing ratio: 5 litres water: 25 kg. Powder represents 1 vol. water: 3 1/2 vol. powder.

Density: Approx. 1.4 kg/litre.

Density of fresh mortar: Approx. 2.0 kg/litre.

Yield: Joints 10 mm wide.

Depth 5 mm.

For mosaics or tiles of:

30 x 30 cm approx. 0.60 kg./m2.

15x15 cm approx. 1.10 kg./m2

10x10 cm approx. 1.70 kg./m2

Increase the loss of material between 0.05-0.10 kg/m2, depending on the surface of the piece and the way of working.

Workability (20°C): Approx. 2 1/2 hours Workability (20°C):

Approx. 5 hours. 

Brinell hardness:

After 1 day approx. 20 N/mm2.

After 3 days approx. 40 N/mm2

After 7 days approx. 60 N/mm2

After 28 days approx. 70 N/mm2

Suitable for underfloor heating: Yes.

Packaging: Bags of 25 Kg net.

Bags of 5 Kg net.

Storage: Approx. 12 months in dry places and in its original closed packaging.

Available colours: According to chart.

Product Details

Family
Cementitious Joints
Application
Indoor and outdoor
Components
Single component
Composition
Cementitious
Support
Floor and wall
Normative UNE
UNE 13888 CG1
GEV-EMICECODE
Not
Minimum joint thickness
2 mm
Maximum joint thickness
20 mm

Attachments

Reviews (0)

No reviews

Related products

Product added to wishlist
Product added to compare.

SPECIAL OFFER

EASTER WEEK 2024

from March 27 to April 1, 2024

10% discount on all products

using the coupon: SANTA2024

IMPORTANT ANNOUNCEMENT

Due to the Easter holiday period, orders placed between

03/27/2024 and 04/01/2024 will be processed starting Tuesday, April 2.

Sorry for the inconvenience.