Acrylate-based mortar admixture for the improvement of cement-based mortars and plasters on concrete. For exterior and interior use.
Field of application:
Addition to mortars:
ARDEX M4 (Repair and anchoring mortar).
ARDEX B12 (Levelling mortar for vertical concrete surfaces)
ARDEX F11 (Fine plaster for façades)
Improves the strength, viscosity, adhesion and tensile behaviour.
Improves the plasticity and workability of the mortar without increasing the water content.
Enables durable repairs on concrete, plaster and screeds, deteriorated finished concrete, repair work in cavities, nooks and corners.
Enables thin bonding layers, increases wear resistance as well as elasticity and improves adhesion of mortar and plaster layers even on smooth substrates.
Increases the adhesion of tiling mortar and the adhesion of natural stone, etc.
For exteriors and interiors.
With ARDEX E100 and after 28 days, adhesion values of more than 2.5 N/mm2 tensile strength are achieved on smooth concrete.
Acrylic dispersion for mixing with cements and special additives.
Instructions for use: Use clean containers:
Use clean containers.
ARDEX E100 should be diluted with water in the following proportions and used as a mixing liquid for the mortars listed, mortar pastes and concrete pastes.
Please note that adhesive pastes require clean substrates for a good bond.
Apply mortar on adhesive pastes fresh on fresh.
Work indoors and outdoors at temperatures above 5°C.
Packaging: 5 kg drums.
Storage: Approx. 12 months in a dry place in the original closed container.