ADIMESH 55 - Flexible fibreglass netting

Flexible fibreglass mesh. For reinforcement of joints, cracks, in waterproofing, coatings, etc. Reinforcement in the preparation of surfaces with epoxy primer. Mesh spacing= 5 mm.

Roll of 1x50m.

Tax excluded


Field of application:

Indicated for the reinforcement of plaster rendering in the lining of cracks in walls and in mortar rendering for the lining of cracks in walls.

Joints of concrete structures with masonry.

Concrete or ceramic joints with insulating material.

In rough coatings and rehabilitation of old facings.

Properties of the product:

High mechanical strength and elongation at break.

Inalterable to alkalis.

Lightweight and flexible.

Instructions for use:

Fibreglass meshes are used as reinforcement in singular points of the construction that accumulate tensions and can cause cracks in the cladding. They should be placed in structural joints, joints between different materials, lintels, slabs.

The mesh should be placed in the centre of the thickness of the cladding, neither too close to the substrate nor to the outer surface.

When joining different materials, the mesh must cover at least 20 cm of each of them.

Mesh overlaps of 5 - 10 cm are recommended.

Technical data

  • Weight: 80 gr/m².
  • Colour: White
  • Warp resistance: > 750 N/50 mm.
  • Weft strength: > 850 N/50 mm.
  • Rolls supplied: 50 m.
  • Width: 1 m.

Product Details


Reviews (0)

No reviews
Product added to wishlist
Product added to compare.


10 % discount on all products

using the coupon: CONS23


Due to the Constitution Day holiday, orders placed between 05/12/2023

and 10/12/2023 will be processed from Monday 11 December.