WAKOL MS550 - PVC and Rubber Adhesive

One-component MS adhesive for laying homogeneous or heterogeneous PVC floor coverings in rolls and tiles, PVC design floor coverings, chemically etched floors, needle punched carpets, linoleum floor coverings, PVC and cork floor coverings, dirt barriers, artificial turf floor coverings, and rubber floor coverings in rolls and tiles on absorbent or non-absorbent screeds indoors and outdoors. Water-resistant. WAKOL MS 550 complies with DIN EN ISO 22636.

Application

• One-component MS adhesive, according to DIN EN 14259, for the installation of:
• homogeneous and heterogeneous PVC floor coverings in rolls and tiles
• PVC design floor coverings
• cushioned vinyl floor coverings
• rubber floor coverings in rolls and tiles
• needle-laminated floor coverings
• linoleum floor coverings
• PVC-cork floor coverings according to DIN EN 655
• Dirt barriers
• Artificial turf flooring on properly prepared absorbent and non-absorbent screeds, indoors and outdoors.

Special Features

1. Solvent-free according to TRGS 610
2. Complies with DIN EN 14259
3. Suitable for heavy loads
4. Moisture-resistant
5. EMICODE EC1 PLUS: Very low emissions according to GEV criteria
6. Emission category A+ according to French law
7. GISCODE RS10, Installation materials, contains methoxysilane
8. Construction product tested for emissions according to DIBt principles: Wakol GmbH, 66954 Pirmasens
9. Suitable for installation over underfloor heating
10. Complies with European Community specifications

Technical Data

• Base raw material: Modified silane polymer
• Flashover time: 0-20 minutes
• Open time: approx. 35 minutes
• Setting time: 24-48 hours
• Cleaning agent: WAKOL RT 5960 Cleaning Wipes, before the adhesive sets
• Storage time: 12 months at room temperature
• Storage temperature: Not sensitive to freezing

Application and consumption *

TKB A1: 300-350 g/m² PVC design flooring, PVC flooring, chemically etched flooring, rubber flooring

TKB A2: 370-420 g/m² PVC design flooring, PVC flooring, chemically etched flooring, rubber flooring, PVC-cork, dirt barriers with smooth backing

TKB B1: 430-480 g/m² rubber flooring with sanded backing > 3.2 mm thick, dirt barriers with structured backing, PVC flooring Linoleum

TKB B2: 520 - 580 g/m² needle punched floor coverings, dirt barriers with backing, structured, artificial grass floor coverings

* Consumption depends on the surface structure and the absorption capacity of the screed.