Scope of use:
Interior, floor.
Underlay for floor elastic coverings, carpet, and tiles onto pretreated
deck areas. Very good adhesion to pretreated steel-, aluminum and
galvanized deck surfaces.
Properties
Grey powder consisting of special cements, selected fillers and easily dispersible synthetic powders. Mixing the powder with the emulsion leads to a smooth, good flowable mortar with excellent leveling properties. The mortar can be worked for approximately 20 – 30 minutes. It is open for foot traffic 3 hours after installation.
ARDEX LM 5 L hardens by hydration rapidly in all thickness layers (2 – 20 mm) to become a very light tension free compound that prevent practically the generation of cracks.
Packaging
- Bags with 15 kg net powder
- Bucket 7,8 kg emulsion
Storage & Shelf Life
Can be stored for approx. 6 month in dry rooms in originally sealed packaging
Technical data
- Mixing Ratio: 7,8 l emulsion:15 kg powder
- Bulk Density: approx. 0,61 kg/l
- Fresh Mortar Weight: approx. 1,1 kg/l
- Density of the Dried Compound: approx. 0,95 kg/l
- Material Requirements: approx. 1,1 kg per m² and mm (powder + emulsion)
- Working Time*: approx. 20 – 30 minutes
- Walkability*: approx. 3 hours
- Ready to Receive Floor Coverings*: After 24 hours
- *All data is approximately based on laboratory test made at a temperature of +20°C and relative humidity of %65. Environmental conditions may change these values. Higher temperatures and lower relative humidity decrease these duration whereas lower temprature and higher relative humidty increases them.
- Compressive Strength
- after 1 day approx. 7 N/mm²
- after 7 days approx. 10 N/mm²
- after 28 days approx. 15 N/mm²
- Tensile Bending Strength
- after 1 day approx. 2,0 N/mm²
- after 7 days approx. 4,0 N/mm²
- after 28 days approx. 6,0 N/mm²
- GISCODE:
- Powder GSCODE ZP1 = contains cement low chromate content
- Emulsion GISCODE D1= dispersion solvent free
- GHS/CLP: GHS07 / Emulsion: none
- GGVSEB/ADR: None